Product Page
Silicone Moulding Rubber
Smooth On Mold Star™ silicone moulding rubbers are easy to use platinum silicones mixed 1A:1B by volume (no weighing scale necessary). Mold Star™ silicones best feature is that vacuum degassing is not required for most applications. Features Mold Star™ silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold...
Smooth On Mold Star™ silicone moulding rubbers are easy to use platinum silicones mixed 1A:1B by volume (no weighing scale necessary). Mold Star™ silicones best feature is that vacuum degassing is not required for most applications.
Features
Mold Star™ silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star™ will last a long time in your mold library and are good for casting wax, gypsum, resins, and other materials. Cured Mold Star™ rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: Mold Star™ rubbers are not intended for brush-on moldmaking.
Note: This product will not cure against surfaces containing sulfur, even when sealed. Product Packaging May Vary to picture.
Technical Data
| Mix Ratio By Volume | 1A:1B |
| Mix Ratio By Weight | 1A:1B |
| Pot Life | 6 minutes |
| Cure Time | 30 minutes |
| Shore Hardness | 16 A |
| Specific Gravity | 1.18 g/cc |
| Specific Volume | 23.5 cu. in./lb. |
| Tensile Strength | 400 psi |
| 100% Modulus | 55 psi |
| Elongation @ Break | 440 % |
| Die B Tear Strength | 88 pli |
| Color | Blue-Green |
| Useful Temperature (max) | 450 °F |
| Useful Temperature (min) | -65 °F |
| Shrinkage | <.001 in. / in. |
| Mixed Viscosity | 12,500 cps |
We predominately cater to local pickup for customers in Townsville, QLD. However we are happy to ship our products Australia-wide where possible.
Shipping costs are NOT calculated at the checkout. If you require shipping please select the Shipping option and we will contact you with a quote. Upon acceptance of the quote, Fibrefinish will issue the shipping costs in a separate invoice.
Unfortunately due to the sheer size of some products, their hazardous nature, or if a destination is too remote - we reserve the right to cancel an order that we are unable to ship.
A refund will be granted for orders that cannot be fulfilled due to this.
For any questions or to receive a quote in advance, please don't hesitate to get in touch with us by email info@fibrefinish.com.au or by phone on 07 4728 5225.
← Previous Product Next Product →
